硅橡膠手板是一種主要用于手板模制作的硅膠制品，硅橡膠手板系列硅膠都是一種流動的液體，無論是什么顏色，其實質量都是不變的，硅橡膠手板粘度低，流動性好、好操作，所以常用語制作各種硅膠模型，硅橡膠手板主要要求：不縮水、不變形，硬度合適不太復雜的產品使用。

Silicone rubber hand plate is a kind of silicone product mainly used for making hand mold. Silicone rubber hand plate series silicone is a kind of flowing liquid. No matter what color it is, its quality is unchanged. Silicone rubber hand plate has low viscosity, good fluidity and easy operation, so it is commonly used to make various silicone models. The main requirements of silicone rubber hand plate are: no shrinkage, no deformation, suitable hardness, and not too complex products.

硅橡膠手板用于制作手板模型設計，PVC塑膠模，水泥制品模具，熔點合金模，合金玩具工藝，塑膠玩具工藝品，禮品文具，大型雕像，文物復制，鞋底模具制造，移印定位，電子設備抗震等。大件產品、手板模型設計、電子產品移印定位、模型設計，翻模次數大概5-10次，是用于做簡單的花紋產品，玩具、車仔，主要要求：不縮水、不變形，硬度合適不太復雜的產品使用。

Silicone rubber hand board is used for making hand board model design, PVC plastic mold, cement product mold, melting point alloy mold, alloy toy process, plastic toy crafts, gift stationery, large statues, cultural relics replication, sole mold manufacturing, pad printing positioning, electronic equipment earthquake resistance, etc. Large products, prototype design, electronic product pad printing positioning, model design, and mold turnover times are about 5-10 times. They are used to make simple pattern products, toys and cars. The main requirements are: no shrinkage, no deformation, and the hardness is suitable for the use of less complex products.

硅橡膠手板是雙組份流動的液體，顏色可調，A組分是流動的液體，B組分是固化劑。先把模種或復制的產品處理好，取一定量的膠體，加入2-3%的固化劑，攪拌均勻后就可以使用，2-3小時模具就可以固化成型。一般要放24個小時后才投入生產中。

Silicone rubber hand board is a two-component flowing liquid with adjustable color. Component A is a flowing liquid and component B is a curing agent. First, handle the mold seed or the copied product, take a certain amount of colloid, add 2-3% curing agent, stir it evenly, and then use it. The mold can be cured and formed in 2-3 hours. Generally, it will be put into production after 24 hours.

濟南手板廠家經過實踐，得出這樣的工藝，開硅橡膠手板模具方式有包模、刷模（分片模、立體模、平面模）、灌注模，這是根據產品的大小來決定的。

Through practice, Jinan handboard manufacturers have come to the conclusion that the methods of opening silicone rubber handboard molds include wrap mold, brush mold (slice mold, three-dimensional mold, plane mold) and pouring mold, which are determined according to the size of products.

1、包模：先在模種上包一層厚度為3~5mm的泥土,做石膏外套，除去泥土漬脫模種，把攪拌好的硅膠和固化劑倒入套有模種的石膏外套，固化成型。

1. Mold wrapping: first wrap a layer of soil with a thickness of 3~5mm on the mold seed, make a gypsum coat, remove the soil stains and demoulding seed, pour the mixed silica gel and curing agent into the gypsum coat with mold seed, and cure it.

2、刷模：一般刷三層式根據模具要求多層，一層刷在模種上抽真空，刷到位。二層貼紗布。三層蓋面固化成型。

2. Brush mold: generally, the three-layer brush type is multi-layer according to the mold requirements. One layer of brush is vacuumized on the mold seed and brushed in place. Apply gauze on the second layer. Three layer cover is cured and formed.

3、灌注模：把攪拌均勻的硅膠和固化劑倒入圍好模種的容器中，抽真空固化成型。有的不能直接取出模種的還須開刀脫模，以便生產順利。

3. Pouring mold: pour the evenly stirred silica gel and curing agent into a container surrounded with mold seeds, and vacuum it for curing. In some cases, if the mold seed cannot be taken out directly, it must be demoulded to facilitate smooth production.

經驗內容僅供參考，如果您需解決具體問題，建議您詳細咨詢相關領域人員，關注我們網站www.tescen.com，為您帶來更多相關知識內容，讓您有所收獲，當然我們也支持定制，來看看吧。

The experience content is only for reference. If you need to solve specific problems, it is recommended that you consult professionals in relevant fields in detail and follow our website www.jrjmockup COM, to bring you more relevant knowledge and content, so that you can gain something. Of course, we also support customization. Let's have a look.